I was looking at the ERCF MMU for several month now. What always kept me from starting the project were the discussions about issues and problems with filament tip forming. Suddenly a new company showed us how they do it quite reliable. They just cut the filament. Further motivated and inspired by the design of @pure100kim who has built the [ERCF_Filament_Cutting_MOD](https://github.com/pure100kim/ERCF_Filament_Cutting_MOD) I started to build my own version of it.
- Currently the design is only available for the Dragon hotend
- As my ERCF is under construction I tested it with roughly 100 cuts by hand not seeing any wear or fatigue
- For the main body i remixed the ECAS version from [Alexanderor](https://www.printables.com/de/model/433797-clockwork-2-ecas-fitting-for-ercf)
## What you need
### Print list
- 1x SB Dragon cutting Printhead back
- 1x SB Dragon cutting Printhead front
- 1x SB Main Buddy Cutting with ECAS
- 1x Cutting arm
- 1x Knife holder
### Parts list - considering you already have a Stealthburner with Dragon Hotend
#### Toolhead:
- Loctite
- 1x M3 nut (DIN934; ideally a countersunk tool to modify the nut for proper filament insertion)
- 2x M3 washer (0.5mm)
- 1x M3x18 SHCS (it repleaces the top left M3x25 SHCS from the SB-Cover mount)
- 2x Voron heat inserts
- 1x M3x18 FHCS (counter sunk screw)
- 1x M3x8 SHCS
- 1x M2.5x16 SHCS (15-18mm works)
- Spring of ballpoint pen (L=15mm; D<=4,5mm) (I've ordered some for testing, to have a "defined" spring)
- Typ 4 Sharp Metall Skalpel (we will cut it to length) [Link](https://de.aliexpress.com/item/1005005117830095.html?spm=a2g0o.order_detail.order_detail_item.9.47c26368QwSbBr&gatewayAdapt=glo2deu)
