mirror of
https://github.com/sorted01/Filametrix.git
synced 2026-01-01 12:55:57 -05:00
Update readme
Rename "Main_Buddy" to "Main_Body"
This commit is contained in:
Michael Jäger
parent
c173d0f016
commit
100c0b7d2f
13 changed files with 79 additions and 70 deletions
149
README.md
149
README.md
|
|
@ -7,77 +7,11 @@ This is a mod of the Voron Stealthburner which adds a filament cutting possibili
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
### Main Body
|
|
||||||
#### Main Body for old motor plate of Clockwork2
|
|
||||||
- SB_CW2_Main_Body_Cutting_with_2xD2F_ECAS
|
|
||||||
- SB_CW2_Main_Body_Cutting_with_D2F_ECAS
|
|
||||||
- SB_CS2_Main_Body_EBB_ECAS_D2F "CW2 main body for the ERCF w/ ECAs, bearing switch, and SB2209 Canbus mods" Thanks to [juliusjj25](https://github.com/juliusjj25)
|
|
||||||
|
|
||||||
#### Main Body for new motor plate of Clockwork2
|
|
||||||
Adapting to recent changes in the Clockwork2 design (July 2023) - Left new / Right old
|
|
||||||
|
|
||||||
|
|
||||||
A step with file the material removed of the motor plate is available here [Cutoff new motor plate](https://github.com/sorted01/Filametrix/blob/main/CAD/CW2_old_motor_plate/SB_CW2_cutoff_new_motor_plate.stp and https://github.com/sorted01/Filametrix/blob/main/CAD/CW2_old_motor_plate/SB_CW2_cutoff_new_motor_plate_with_offset.stp and )
|
|
||||||
|
|
||||||
*If your main body is not listed below, use the old [motor plate](https://github.com/sorted01/Filametrix/blob/main/STL/motor_plate.stl)*
|
|
||||||
|
|
||||||
A more compact version using a M6 bowden fitting instead of the ECAS is also available for some main bodys.
|
|
||||||
Additonally, a more rigid [latch](https://github.com/sorted01/Filametrix/blob/main/STL/[a]_latch_M6.stl) is available for the M6 version. (ECAS version of the latch is compatible with all M6 main bodys.)
|
|
||||||
|
|
||||||
* ECAS mount
|
|
||||||
- SB_CW2_new_motor_plate_Main_Buddy_Cutting_with_ECAS
|
|
||||||
- SB_CW2_new_motor_Main_Buddy_Cutting_with_2xD2F_ECAS_fix_Rev1
|
|
||||||
- SB_CW2_new_motor_Main_Buddy_Cutting_with_D2F_ECAS
|
|
||||||
- SB_CS2_new_motor_plate_Main_Buddy_EBB_ECAS_D2F
|
|
||||||
|
|
||||||
* M6 bowden mount
|
|
||||||
- SB_CW2_new_motor_plate_Main_Buddy_Cutting_with_M6
|
|
||||||
|
|
||||||
#### Support for LGX Lite
|
|
||||||
https://www.printables.com/de/model/576122-lgx-lite-stealthburner-filament-cutter
|
|
||||||
|
|
||||||
tommorox234 has created the main body for the LGX Lite. Feel free to get in contact with him via printables.
|
|
||||||
Thank you :)
|
|
||||||
|
|
||||||
### Printhead
|
|
||||||
#### Update for Phaetus Dragon UHF and Phaetus Dragon UHF mini
|
|
||||||
- SB_Dragon_UHF_cutting_TH_Front or SB_Dragon_UHF_mini_cutting_TH_Front
|
|
||||||
- SB_Dragon_UHF_cutting_TH_Rear or SB_Dragon_UHF_mini_cutting_TH_Rear
|
|
||||||
- Knife_holder_Dragon_UHF
|
|
||||||
|
|
||||||
by [emjay276](https://github.com/emjay276)
|
|
||||||
|
|
||||||
#### Update for Bambu Hotend has been added.
|
|
||||||
- SB_Bambu_cutting_Printhead_back
|
|
||||||
- SB_Bambu_cutting_Printhead_front or SB_Bambu_cutting_Printhead_front_2
|
|
||||||
- Bambu_Adapter
|
|
||||||
|
|
||||||
Thanks to "Jakub Kadlec" from Facebook :)
|
|
||||||
|
|
||||||
#### Update for Voron Revo Hotend
|
|
||||||
- SB_RevoVoron_back
|
|
||||||
- SB_RevoVoron_front
|
|
||||||
|
|
||||||
by Russell Gower - NOTE currently untested!!
|
|
||||||
|
|
||||||
#### Update for Rapido Hotend
|
|
||||||
|
|
||||||
- see folder
|
|
||||||
|
|
||||||
say thank you to [juliusjj25](https://github.com/juliusjj25) :)
|
|
||||||
|
|
||||||
#### Update for Slice engingeering mosquito hotend
|
|
||||||
|
|
||||||
https://www.printables.com/de/model/614813-filametrix-mod-for-slice-engingeering-mosquito-hot
|
|
||||||
|
|
||||||
say thank you to "https://www.printables.com/de/@MakeAUsername_285162"
|
|
||||||
|
|
||||||
## Motivation
|
## Motivation
|
||||||
I was looking at the ERCF MMU for several month now. What always kept me from starting the project were the discussions about issues and problems with filament tip forming. Suddenly a new company showed us how they do it quite reliable. They just cut the filament. Further motivated and inspired by the design of @pure100kim who has built the [ERCF_Filament_Cutting_MOD](https://github.com/pure100kim/ERCF_Filament_Cutting_MOD) I started to build my own version of it.
|
I was looking at the ERCF MMU for several month now. What always kept me from starting the project were the discussions about issues and problems with filament tip forming. Suddenly a new company showed us how they do it quite reliable. They just cut the filament. Further motivated and inspired by the design of @pure100kim who has built the [ERCF_Filament_Cutting_MOD](https://github.com/pure100kim/ERCF_Filament_Cutting_MOD) I started to build my own version of it.
|
||||||
|
|
||||||
## See how it works
|
## See how it works
|
||||||
|
|
||||||
|
|
||||||
Proof of concept 1: https://youtube.com/shorts/HOMG8cVk_U4
|
Proof of concept 1: https://youtube.com/shorts/HOMG8cVk_U4
|
||||||
|
|
||||||
Proof of concept 2: https://youtu.be/tTcrxttyths
|
Proof of concept 2: https://youtu.be/tTcrxttyths
|
||||||
|
|
@ -85,20 +19,95 @@ Proof of concept 2: https://youtu.be/tTcrxttyths
|
||||||
Filametrix in action: https://www.youtube.com/watch?v=tfMZWQRqtvY
|
Filametrix in action: https://www.youtube.com/watch?v=tfMZWQRqtvY
|
||||||
|
|
||||||
## Good to know
|
## Good to know
|
||||||
|
|
||||||
Please be aware:
|
Please be aware:
|
||||||
- We will need to use one of the ADXL mounting threads
|
- We will need to use one of the ADXL mounting threads
|
||||||
- Depending on the setup and position of the cutting point we will most probably not lose any build volume
|
- Depending on the setup and position of the cutting point we will most probably not lose any build volume
|
||||||
- For the main body i remixed the ECAS version from [Alexanderor](https://www.printables.com/de/model/433797-clockwork-2-ecas-fitting-for-ercf)
|
- For the main body i remixed the ECAS version from [Alexanderor](https://www.printables.com/de/model/433797-clockwork-2-ecas-fitting-for-ercf)
|
||||||
|
|
||||||
|
## Extruder and Printhead options
|
||||||
|
### Extruder
|
||||||
|
#### Clockwork2 Extruder
|
||||||
|
Due to recent changes in the Clockwork2 design (July 2023) two motor plates exist, please check carefully which version you are using and print the corresponding main body.
|
||||||
|
<img src="https://github.com/sorted01/Filametrix/assets/8619525/58c7e930-77d1-4c09-8238-f49af9075681" alt="front_uhf" width="800"/>
|
||||||
|
|
||||||
|
STEP / STL files with the material removed for the new version of the motor plate are also available here
|
||||||
|
- [Cutoff new motor plate.stp](CAD/CW2_old_motor_plate/SB_CW2_cutoff_new_motor_plate.stp)
|
||||||
|
- [Cutoff new motor plate with offset.stp](CAD/CW2_old_motor_plate/SB_CW2_cutoff_new_motor_plate_with_offset.stp)
|
||||||
|
- [Cutoff new motor plate with offset.stl](STL/CW2_old_motor_plate/SB_CW2_cutoff_new_motor_plate_with_offset.stl)
|
||||||
|
|
||||||
|
##### Old motor plate
|
||||||
|
- SB_CW2_Main_Body_Cutting_with_2xD2F_ECAS
|
||||||
|
- SB_CW2_Main_Body_Cutting_with_D2F_ECAS
|
||||||
|
- SB_CS2_Main_Body_EBB_ECAS_D2F "CW2 main body for the ERCF w/ ECAs, bearing switch, and SB2209 Canbus mods" Thanks to [juliusjj25](https://github.com/juliusjj25)
|
||||||
|
|
||||||
|
The old motor plate can be found [here](STL/CW2_old_motor_plate/motor_plate.stl)
|
||||||
|
|
||||||
|
##### New motor plate
|
||||||
|
ECAS mount
|
||||||
|
- SB_CW2_new_motor_plate_Main_Body_Cutting_with_ECAS
|
||||||
|
- SB_CW2_new_motor_plate_Main_Body_Cutting_with_2xD2F_ECAS_fix_Rev1
|
||||||
|
- SB_CW2_new_motor_plate_Main_Body_Cutting_with_D2F_ECAS
|
||||||
|
- SB_CS2_new_motor_plate_Main_Body_EBB_ECAS_D2F
|
||||||
|
|
||||||
|
M6 bowden mount
|
||||||
|
- SB_CW2_new_motor_plate_Main_Body_Cutting_with_M6
|
||||||
|
|
||||||
|
A more compact version using a M6 bowden fitting instead of the ECAS is also available for some main bodys.
|
||||||
|
Additonally, a more rigid [latch](STL/[a]_latch_M6.stl) is available for the M6 version. (ECAS version of the latch is compatible with all M6 main bodys.)
|
||||||
|
|
||||||
|
#### LGX Lite Extruder
|
||||||
|
https://www.printables.com/de/model/576122-lgx-lite-stealthburner-filament-cutter
|
||||||
|
|
||||||
|
tommorox234 has created the main body for the LGX Lite. Feel free to get in contact with him via printables.
|
||||||
|
Thank you :)
|
||||||
|
|
||||||
|
#### StealthOrbiter
|
||||||
|
- ORBITERMOUNT_STANDARD_PG7_V2_Cutting - NOTE currently untested!!
|
||||||
|
|
||||||
|
by [emjay276](https://github.com/emjay276)
|
||||||
|
|
||||||
|
|
||||||
|
### Printhead
|
||||||
|
#### Phaetus Dragon UHF and Phaetus Dragon UHF mini
|
||||||
|
- SB_Dragon_UHF_cutting_TH_Front or SB_Dragon_UHF_mini_cutting_TH_Front
|
||||||
|
- SB_Dragon_UHF_cutting_TH_Rear or SB_Dragon_UHF_mini_cutting_TH_Rear
|
||||||
|
- Knife_holder_Dragon_UHF
|
||||||
|
|
||||||
|
by [emjay276](https://github.com/emjay276)
|
||||||
|
|
||||||
|
#### Bambu Hotend
|
||||||
|
- SB_Bambu_cutting_Printhead_back
|
||||||
|
- SB_Bambu_cutting_Printhead_front or SB_Bambu_cutting_Printhead_front_2
|
||||||
|
- Bambu_Adapter
|
||||||
|
|
||||||
|
Thanks to "Jakub Kadlec" from Facebook :)
|
||||||
|
|
||||||
|
#### Voron Revo Hotend
|
||||||
|
- SB_RevoVoron_back
|
||||||
|
- SB_RevoVoron_front
|
||||||
|
|
||||||
|
by Russell Gower - NOTE currently untested!!
|
||||||
|
|
||||||
|
#### Rapido Hotend
|
||||||
|
- SBRapido TH Front_cutter
|
||||||
|
- SBRapido TH Rear CW2_cutter
|
||||||
|
|
||||||
|
say thank you to [juliusjj25](https://github.com/juliusjj25) :)
|
||||||
|
|
||||||
|
#### Slice engingeering mosquito hotend
|
||||||
|
|
||||||
|
https://www.printables.com/de/model/614813-filametrix-mod-for-slice-engingeering-mosquito-hot
|
||||||
|
|
||||||
|
say thank you to "https://www.printables.com/de/@MakeAUsername_285162"
|
||||||
|
|
||||||
|
|
||||||
## What you need
|
## What you need
|
||||||
### Print list
|
### Print list
|
||||||
#### Toolhead
|
#### Toolhead
|
||||||
- 1x SB (hotend name) cutting Printhead back
|
- 1x SB (hotend name) cutting Printhead back
|
||||||
- 1x SB (hotend name) cutting Printhead front
|
- 1x SB (hotend name) cutting Printhead front
|
||||||
- 1x SB Main body Cutting with ECAS (or with sensor)
|
- 1x SB Main body Cutting ECAS or M6 or with sensors
|
||||||
- 1x SB motor plate (as Stealthburner has seen a small update the newest plate does not fit anymore. So please use the one from this git)
|
- 1x SB latch ECAS or M6
|
||||||
- 1x SB latch ECAS
|
|
||||||
- 1x Cutting arm
|
- 1x Cutting arm
|
||||||
- 1x Knife holder
|
- 1x Knife holder
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue