From 4815891eb3ad35fa75d33e8dd551e777b76a5ee2 Mon Sep 17 00:00:00 2001
From: gennro <gennro2004@gmail.com>
Date: Mon, 11 Sep 2023 19:34:54 -0800
Subject: [PATCH] Update README.md

---
 README.md | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/README.md b/README.md
index 63f8f58..4ee7802 100644
--- a/README.md
+++ b/README.md
@@ -118,6 +118,8 @@ Check the orientation of the hole for the M2.5 screw in the knife holder. It nee
 
 
 ### Add heat inserts
+
+Tip here for the heat set that goes above the cutter I would suggest drilling the threads out with a ~2.5mm drill bit. On the hotend holder side below the cutter make sure you flare out the PTFE tube to help guide the filament.
 #### Main body
 ![image](https://github.com/sorted01/Filametrix/assets/83211473/8324c808-83cd-4b8d-a89a-45ca6b4836d8)
 #### SB cutting Printhead back