From bb7a852385a759e59422a1ca0f7c8341b8803fae Mon Sep 17 00:00:00 2001 From: LangLe Date: Fri, 7 Mar 2025 16:59:08 -0500 Subject: [PATCH] changed md file name so it would show in github --- STL/Revo_Micro/Readme.md | 8 ++++++++ 1 file changed, 8 insertions(+) create mode 100644 STL/Revo_Micro/Readme.md diff --git a/STL/Revo_Micro/Readme.md b/STL/Revo_Micro/Readme.md new file mode 100644 index 0000000..a988361 --- /dev/null +++ b/STL/Revo_Micro/Readme.md @@ -0,0 +1,8 @@ +# Revo Micro Versions +There are two versions of the revo micro adapter, a version with the nut at the top to act as a cutting surface, and a version that is basically the stock Stealthburner revo micro adapter but with space for the cutter. + +### Nut version +The Nut version is the recommended version to print, it uses a nut which has had the threads drilled out and has been countersunk to make filament insertion easier. + +## Traditional version +The traditional version is basically the same as the one that comes with the stelthburner, it would use the top of the PTFE tube as the cutting surface. Truthfully I only made this version since I did not realise there was supposed to be a bolt at the top to help with inserting filament. I don't recommend this version but if you need it its here. \ No newline at end of file