ORBITERMOUNT_STANDARD_PG7_V2_Cutting.stl
Mount provided by emjay276 - PG7 connector

ORBITERMOUNT_STANDARD_V3_Cutting v1.stl
Cutting remix by SaltyPaws using latest from https://github.com/sneakytreesnake/StealthOrbiter for mounting CANBUS or those who don't need PG7.

ORBITERMOUNT_STANDARD_No_Cover_V3_Cutting v1.stl
As above, but removing the cover mounting slot, for those who prefer to run without covering their Orbiter2.0

ORBITERMOUNT_STANDARD_No_Cover_Sensor_V3_Cutting v1.stl
As above, but now with slot for below extruder filament sensor. Note, print with supports painted on for the sensor section, as bridging is not sufficient here.