milo/Filametrix
1
0
Fork 0
mirror of https://github.com/sorted01/Filametrix.git synced 2026-01-01 12:55:57 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions
Filametrix/STL/StealthOrbiter
History
Saltypaws a14f7b4677 Fix for issue #45, PG7 version
2024-02-06 12:10:16 -09:00
..
Cutter body small.obj Fix for issue #45, PG7 version 2024-02-06 12:10:16 -09:00
Orbiter body Filamentrix.obj Fix for issue #45, PG7 version 2024-02-06 12:10:16 -09:00
ORBITERMOUNT_No_Sensor_V3_Cutting v2.stl.3mf Fix for issue #45, lever are does not close and adding standard and sensor version for StealthOrbiter Toolhead. 2024-02-06 11:48:35 -09:00
ORBITERMOUNT_Sensor_V3_Cutting v2.3mf Fix for issue #45, lever are does not close and adding standard and sensor version for StealthOrbiter Toolhead. 2024-02-06 11:48:35 -09:00
PXL_20240206_062519943.jpg Fix for issue #45, lever are does not close and adding standard and sensor version for StealthOrbiter Toolhead. 2024-02-06 11:48:35 -09:00
PXL_20240206_062545758.jpg Fix for issue #45, lever are does not close and adding standard and sensor version for StealthOrbiter Toolhead. 2024-02-06 11:48:35 -09:00
PXL_20240206_194107226.jpg Fix for issue #45, lever are does not close and adding standard and sensor version for StealthOrbiter Toolhead. 2024-02-06 11:48:35 -09:00
README.md Fix for issue #45, PG7 version 2024-02-06 12:10:16 -09:00

README.md

Remixes below bt SaltyPaws have been tested (see attached images) with lever arm from https://www.printables.com/model/647601-orbiter-filametrix-mod.

Cutting remix by SaltyPaws using latest from https://github.com/sneakytreesnake/StealthOrbiter for mounting CANBUS or those who don't need PG7 and need their lever arm to work.

ORBITERMOUNT_No_Sensor_V3_Cutting v2.stl

Cutting remix by SaltyPaws no sensor version.

ORBITERMOUNT_Sensor_V3_Cutting v2.stl

Cutting remix by SaltyPaws as above, but now with slot for below extruder filament sensor. Note that this needs to be printed with supports painted on for the sensor section, as bridging is not sufficient here. Sensor version uses v0.1 BOM limit switches (lever microswitch) with the end of the lever trimmed to fit. It uses the metal ball from the orbitor sensor (6 mm). M2 hex bolts can be threaded straight into the plastic, or you can melt a m2 nut on the other side.

Below remixes by Charles@CharlesDahlma_340167 (https://www.printables.com/model/647601-orbiter-filametrix-mod.)

Cutter body small.obj Used with all model files above

Orbiter body Filamentrix.obj PG7 version