From 0240739d1bcb750e8f0a185864f6f27e1a4ff12e Mon Sep 17 00:00:00 2001
From: miguel <miguelloy97@gmail.com>
Date: Thu, 21 Aug 2025 17:43:33 +0100
Subject: [PATCH] printer.cfg modified - 21/08/25 - 17:43:27

---
 printer_data/config/printer.cfg | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/printer_data/config/printer.cfg b/printer_data/config/printer.cfg
index 5f19ef9..4b5f4bf 100644
--- a/printer_data/config/printer.cfg
+++ b/printer_data/config/printer.cfg
@@ -461,14 +461,14 @@ off_below: 0.10
 [idle_timeout]
 timeout: 1800
 
-[safe_z_home]
-##  XY Location of the Z Endstop Switch
-##  Update -10,-10 to the XY coordinates of your endstop pin 
-##  (such as 157,305) after going through Z Endstop Pin
-##  Location Definition step.
-home_xy_position: 175,175
-speed:100
-z_hop:10
+#[safe_z_home]
+###  XY Location of the Z Endstop Switch
+###  Update -10,-10 to the XY coordinates of your endstop pin 
+###  (such as 157,305) after going through Z Endstop Pin
+###  Location Definition step.
+#home_xy_position: 175,175
+#speed:100
+#z_hop:10
 
 [z_tilt]
 ##  Use Z_TILT_ADJUST to level the bed .