From 13893a73da0622ed0829543d2d5dccaffead88d3 Mon Sep 17 00:00:00 2001
From: miguel <miguelloy97@gmail.com>
Date: Fri, 22 Aug 2025 19:43:22 +0100
Subject: [PATCH] printer.cfg modified - 22/08/25 - 19:43:16

---
 printer_data/config/printer.cfg | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/printer_data/config/printer.cfg b/printer_data/config/printer.cfg
index 6008ec5..982e194 100644
--- a/printer_data/config/printer.cfg
+++ b/printer_data/config/printer.cfg
@@ -233,7 +233,7 @@ enable_pin: !nhk:gpio25
 ##  If you ask for 100mm of filament, but in reality it is 98mm:
 ##  rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
 ##  22.6789511 is a good starting point
-rotation_distance: 21.9985825 #22.6789511   #Bondtech 5mm Drive Gears old: 13.056242
+rotation_distance: 20.9510 #22.6789511   #Bondtech 5mm Drive Gears old: 13.056242
 max_extrude_only_distance: 101
 ##  Update Gear Ratio depending on your Extruder Type
 ##  Use 50:10 for Stealthburner/Clockwork 2