mirror of
https://github.com/mloy97/RedboneBackup.git
synced 2026-01-01 13:35:56 -05:00
stealthburner_leds.cfg modified - 21/08/25 - 05:03:13
This commit is contained in:
parent
05eb41b5d5
commit
46cd7deaa2
1 changed files with 219 additions and 130 deletions
|
|
@ -10,7 +10,7 @@
|
||||||
# How to use all this stuff:
|
# How to use all this stuff:
|
||||||
#
|
#
|
||||||
# 1. Copy this .cfg file into your Klipper config directory and then add [include stealthburner_leds.cfg]
|
# 1. Copy this .cfg file into your Klipper config directory and then add [include stealthburner_leds.cfg]
|
||||||
# to the top of your printer.cfg in order to register the LEDs and macros with Klipper.
|
# to the top of your printer.cfg in order for register the LEDs and macros with Klipper.
|
||||||
# 2. Define your LEDs by editing [neopixel sb_leds] below and entering the data pin from your control board
|
# 2. Define your LEDs by editing [neopixel sb_leds] below and entering the data pin from your control board
|
||||||
# as well as the color order.
|
# as well as the color order.
|
||||||
#
|
#
|
||||||
|
|
@ -45,7 +45,8 @@
|
||||||
#
|
#
|
||||||
# 5. Feel free to change colors of each macro, create new ones if you have a need to. The macros provided below
|
# 5. Feel free to change colors of each macro, create new ones if you have a need to. The macros provided below
|
||||||
# are just an example of what is possible. If you want to try some more complex animations, you will most
|
# are just an example of what is possible. If you want to try some more complex animations, you will most
|
||||||
# likely have to use WLED with Moonraker and a small micro-controller
|
# likely have to use WLED with Moonraker and a small micro-controller (please see the LED thread for help inside
|
||||||
|
# of the stealthburner_beta channel on Discord).
|
||||||
#
|
#
|
||||||
#####################################
|
#####################################
|
||||||
# END INSTRUCTRUCTIONS #
|
# END INSTRUCTRUCTIONS #
|
||||||
|
|
@ -53,13 +54,13 @@
|
||||||
|
|
||||||
|
|
||||||
[neopixel sb_leds]
|
[neopixel sb_leds]
|
||||||
pin: PB0
|
pin: nhk:gpio7
|
||||||
# The pin connected to the neopixel. This parameter must be provided.
|
# The pin connected to the neopixel. This parameter must be provided.
|
||||||
chain_count: 3
|
chain_count: 10
|
||||||
# The number of Neopixel chips that are "daisy chained" to the
|
# The number of Neopixel chips that are "daisy chained" to the
|
||||||
# provided pin. The default is 1 (which indicates only a single
|
# provided pin. The default is 1 (which indicates only a single
|
||||||
# Neopixel is connected to the pin).
|
# Neopixel is connected to the pin).
|
||||||
color_order: GRB
|
color_order: GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRBW, GRBW
|
||||||
# Set the pixel order required by the LED hardware. Options are GRB,
|
# Set the pixel order required by the LED hardware. Options are GRB,
|
||||||
# RGB, GRBW, or RGBW. The default is GRB.
|
# RGB, GRBW, or RGBW. The default is GRB.
|
||||||
initial_RED: 1.0
|
initial_RED: 1.0
|
||||||
|
|
@ -70,185 +71,273 @@ initial_WHITE: 0.0
|
||||||
# between 0.0 and 1.0. The WHITE option is only available on RGBW
|
# between 0.0 and 1.0. The WHITE option is only available on RGBW
|
||||||
# LEDs. The default for each color is 0.#
|
# LEDs. The default for each color is 0.#
|
||||||
|
|
||||||
# Most configuration for the macros can be done by modifying the variables in the _sb_vars macro
|
|
||||||
# at the start of this file.
|
|
||||||
|
|
||||||
##########
|
##########################
|
||||||
# MACROS #
|
# LED Effects Animations #
|
||||||
##########
|
##########################
|
||||||
|
|
||||||
# The following status macros are available (these go inside of your macros):
|
##################
|
||||||
#
|
## logo effects ##
|
||||||
# STATUS_READY
|
##################
|
||||||
# STATUS_OFF
|
|
||||||
# STATUS_BUSY
|
[led_effect sb_logo_busy]
|
||||||
# STATUS_HEATING
|
autostart: false
|
||||||
# STATUS_LEVELING
|
frame_rate: 24
|
||||||
# STATUS_HOMING
|
leds:
|
||||||
# STATUS_CLEANING
|
neopixel:sb_leds (1-8)
|
||||||
# STATUS_MESHING
|
layers:
|
||||||
# STATUS_CALIBRATING_Z
|
breathing 3 1 top (1,0,0)
|
||||||
#
|
|
||||||
# With additional macros for basic control:
|
[led_effect sb_logo_cleaning]
|
||||||
#
|
autostart: false
|
||||||
# SET_NOZZLE_LEDS_ON
|
frame_rate: 24
|
||||||
# SET_LOGO_LEDS_OFF
|
leds:
|
||||||
# SET_NOZZLE_LEDS_OFF
|
neopixel:sb_leds (1-8)
|
||||||
#
|
layers:
|
||||||
# Contributed by Voron discord users wile.e, Tetsunosuke, and etherwalker
|
breathing 3 1 top (0.0, 0.02, 0.5)
|
||||||
|
|
||||||
|
[led_effect sb_logo_calibrating_z]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (1-8)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (0.0, 0.0, 0.35)
|
||||||
|
|
||||||
|
[led_effect sb_logo_heating]
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (1,3,7,8,6,2)
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
layers:
|
||||||
|
comet 0.3 0 add (1, 0.18, 0)
|
||||||
|
|
||||||
|
[led_effect sb_logo_cooling]
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (1,3,7,8,6,2)
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
layers:
|
||||||
|
comet 0.3 0 add (0, 0, 1)
|
||||||
|
|
||||||
|
[led_effect sb_logo_homing]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (1-8)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (0.0, 0.6, 0.2)
|
||||||
|
|
||||||
|
[led_effect sb_logo_leveling]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (1-8)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (0.5, 0.1, 0.4)
|
||||||
|
|
||||||
|
[led_effect sb_logo_meshing]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (1-8)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (0.2, 1.0, 0.0)
|
||||||
|
|
||||||
|
[led_effect sb_logo_printing]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (1-8)
|
||||||
|
layers:
|
||||||
|
gradient 0.3 1 add (0.3, 0.0, 0.0),(0.3, 0.3, 0.0),(0.3, 0.1, 0.0)
|
||||||
|
|
||||||
|
[led_effect sb_logo_standby]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (1-8)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (0.01, 0.01, 0.01)
|
||||||
|
|
||||||
|
[led_effect sb_logo_part_ready]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (1-8)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (0.0, 1.0, 0.0)
|
||||||
|
|
||||||
|
####################
|
||||||
|
## nozzle effects ##
|
||||||
|
####################
|
||||||
|
|
||||||
|
[led_effect sb_nozzle_heating]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (9,10)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (1.0, 0.18, 0.0, 0.0)
|
||||||
|
|
||||||
|
[led_effect sb_nozzle_cooling]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (9,10)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (0.0, 0.0, 1.0, 0.1)
|
||||||
|
|
||||||
|
[led_effect sb_nozzle_standby]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (9,10)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (0.6, 0.0, 0.0, 0.0)
|
||||||
|
|
||||||
|
[led_effect sb_nozzle_part_ready]
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (9,10)
|
||||||
|
layers:
|
||||||
|
breathing 3 1 top (0.6, 1.0, 0.0, 0.1)
|
||||||
|
|
||||||
|
|
||||||
[gcode_macro _sb_vars]
|
#####################
|
||||||
# User settings for the StealthBurner status leds. You can change the status colors and led
|
## all led effects ##
|
||||||
# configurations for the logo and nozzle here.
|
#####################
|
||||||
variable_colors: {
|
|
||||||
'logo': { # Colors for logo states
|
[led_effect sb_critical_error]
|
||||||
'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
leds:
|
||||||
'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
|
neopixel:sb_leds
|
||||||
'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
|
layers:
|
||||||
'heating': {'r': 0.3, 'g': 0.18, 'b': 0.0, 'w': 0.0},
|
strobe 1 1.5 add (1.0, 1.0, 1.0)
|
||||||
'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
|
breathing 2 0 difference (0.95, 0.0, 0.0)
|
||||||
'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
|
static 1 0 top (1.0, 0.0, 0.0)
|
||||||
'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
|
autostart: false
|
||||||
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
frame_rate: 24
|
||||||
'printing': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
run_on_error: true
|
||||||
'standby': {'r': 0.01, 'g': 0.01, 'b': 0.01, 'w': 0.1},
|
|
||||||
},
|
|
||||||
'nozzle': { # Colors for nozzle states
|
|
||||||
'heating': {'r': 0.8, 'g': 0.35, 'b': 0.0, 'w':0.0},
|
|
||||||
'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
|
||||||
'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
|
|
||||||
'standby': {'r': 0.6, 'g': 0.0, 'b': 0.0, 'w':0.0},
|
|
||||||
},
|
|
||||||
'thermal': {
|
|
||||||
'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
|
|
||||||
'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
variable_logo_led_name: "sb_leds"
|
|
||||||
# The name of the addressable LED chain that contains the logo LED(s)
|
|
||||||
variable_logo_idx: "1"
|
|
||||||
# A comma-separated list of indexes LEDs in the logo
|
|
||||||
variable_nozzle_led_name: "sb_leds"
|
|
||||||
# The name of the addressable LED chain that contains the nozzle LED(s). This will
|
|
||||||
# typically be the same LED chain as the logo.
|
|
||||||
variable_nozzle_idx: "2,3"
|
|
||||||
# A comma-separated list of indexes of LEDs in the nozzle
|
|
||||||
gcode:
|
|
||||||
# This section is required. Do Not Delete.
|
|
||||||
|
|
||||||
|
|
||||||
[gcode_macro _set_sb_leds]
|
[led_effect rainbow]
|
||||||
gcode:
|
leds:
|
||||||
{% set red = params.RED|default(0)|float %}
|
neopixel:sb_leds
|
||||||
{% set green = params.GREEN|default(0)|float %}
|
autostart: true
|
||||||
{% set blue = params.BLUE|default(0)|float %}
|
frame_rate: 24
|
||||||
{% set white = params.WHITE|default(0)|float %}
|
layers:
|
||||||
{% set led = params.LED|string %}
|
gradient 0.3 1 add (0.3, 0.0, 0.0),(0.0, 0.3, 0.0),(0.0, 0.0, 0.3)
|
||||||
{% set idx = (params.IDX|string).split(',') %}
|
|
||||||
{% set transmit_last = params.TRANSMIT|default(1) %}
|
|
||||||
|
|
||||||
{% for led_index in idx %}
|
|
||||||
{% set transmit=transmit_last if loop.last else 0 %}
|
|
||||||
set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
|
|
||||||
{% endfor %}
|
|
||||||
|
|
||||||
[gcode_macro _set_sb_leds_by_name]
|
#######################
|
||||||
gcode:
|
# LED Effects Statics #
|
||||||
{% set leds_name = params.LEDS %}
|
#######################
|
||||||
{% set color_name = params.COLOR %}
|
|
||||||
{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
|
|
||||||
{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
|
|
||||||
{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
|
|
||||||
{% set transmit = params.TRANSMIT|default(1) %}
|
|
||||||
|
|
||||||
_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}
|
[led_effect set_nozzle_leds]
|
||||||
|
leds:
|
||||||
|
neopixel:sb_leds (9,10)
|
||||||
|
#neopixel:caselight
|
||||||
|
autostart: false
|
||||||
|
frame_rate: 24
|
||||||
|
layers:
|
||||||
|
static 0 0 top (0.0, 0.0, 0.0, 1.0)
|
||||||
|
|
||||||
[gcode_macro _set_logo_leds]
|
[led_effect set_logo_leds]
|
||||||
gcode:
|
leds:
|
||||||
{% set red = params.RED|default(0)|float %}
|
neopixel:sb_leds (1,2,3,4,5,6,7,8)
|
||||||
{% set green = params.GREEN|default(0)|float %}
|
#neopixel:caselight
|
||||||
{% set blue = params.BLUE|default(0)|float %}
|
autostart: false
|
||||||
{% set white = params.WHITE|default(0)|float %}
|
frame_rate: 24
|
||||||
{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
|
layers:
|
||||||
{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
|
static 0 0 top (1.0, 1.0, 1.0)
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
|
||||||
|
|
||||||
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
|
##############
|
||||||
|
# The Macros #
|
||||||
[gcode_macro _set_nozzle_leds]
|
##############
|
||||||
gcode:
|
|
||||||
{% set red = params.RED|default(0)|float %}
|
|
||||||
{% set green = params.GREEN|default(0)|float %}
|
|
||||||
{% set blue = params.BLUE|default(0)|float %}
|
|
||||||
{% set white = params.WHITE|default(0)|float %}
|
|
||||||
{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
|
|
||||||
{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
|
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
|
||||||
|
|
||||||
_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}
|
|
||||||
|
|
||||||
[gcode_macro set_logo_leds_off]
|
[gcode_macro set_logo_leds_off]
|
||||||
gcode:
|
gcode:
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
SET_LED_EFFECT EFFECT=set_logo_leds STOP=1
|
||||||
_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}
|
|
||||||
|
[gcode_macro set_logo_leds_on]
|
||||||
|
gcode:
|
||||||
|
SET_LED_EFFECT EFFECT=set_logo_leds
|
||||||
|
|
||||||
[gcode_macro set_nozzle_leds_on]
|
[gcode_macro set_nozzle_leds_on]
|
||||||
gcode:
|
gcode:
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
SET_LED_EFFECT EFFECT=set_nozzle_leds
|
||||||
_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}
|
|
||||||
|
|
||||||
[gcode_macro set_nozzle_leds_off]
|
[gcode_macro set_nozzle_leds_off]
|
||||||
gcode:
|
gcode:
|
||||||
{% set transmit=params.TRANSMIT|default(1) %}
|
SET_LED_EFFECT EFFECT=set_nozzle_leds STOP=1
|
||||||
_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}
|
|
||||||
|
|
||||||
[gcode_macro status_off]
|
[gcode_macro status_off]
|
||||||
gcode:
|
gcode:
|
||||||
set_logo_leds_off transmit=0
|
STOP_LED_EFFECTS
|
||||||
set_nozzle_leds_off
|
|
||||||
|
|
||||||
[gcode_macro status_ready]
|
[gcode_macro status_ready]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="standby" transmit=0
|
STOP_LED_EFFECTS
|
||||||
_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1
|
SET_LED_EFFECT EFFECT=rainbow
|
||||||
|
|
||||||
|
[gcode_macro status_part_ready]
|
||||||
|
gcode:
|
||||||
|
STOP_LED_EFFECTS
|
||||||
|
SET_LED_EFFECT EFFECT=sb_nozzle_part_ready
|
||||||
|
SET_LED_EFFECT EFFECT=sb_logo_part_ready
|
||||||
|
|
||||||
[gcode_macro status_busy]
|
[gcode_macro status_busy]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="busy" transmit=0
|
STOP_LED_EFFECTS
|
||||||
|
SET_LED_EFFECT EFFECT=sb_logo_busy
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_heating]
|
[gcode_macro status_heating]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="heating" transmit=0
|
STOP_LED_EFFECTS
|
||||||
_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1
|
SET_LED_EFFECT EFFECT=sb_logo_heating
|
||||||
|
SET_LED_EFFECT EFFECT=sb_nozzle_heating
|
||||||
|
|
||||||
|
[gcode_macro status_cooling]
|
||||||
|
gcode:
|
||||||
|
STOP_LED_EFFECTS
|
||||||
|
SET_LED_EFFECT EFFECT=sb_logo_cooling
|
||||||
|
SET_LED_EFFECT EFFECT=sb_nozzle_cooling
|
||||||
|
|
||||||
|
|
||||||
[gcode_macro status_leveling]
|
[gcode_macro status_leveling]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
|
STOP_LED_EFFECTS
|
||||||
|
SET_LED_EFFECT EFFECT=sb_logo_leveling
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_homing]
|
[gcode_macro status_homing]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="homing" transmit=0
|
STOP_LED_EFFECTS
|
||||||
|
SET_LED_EFFECT EFFECT=sb_logo_homing
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_cleaning]
|
[gcode_macro status_cleaning]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
|
STOP_LED_EFFECTS
|
||||||
|
SET_LED_EFFECT EFFECT=sb_logo_cleaning
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_meshing]
|
[gcode_macro status_meshing]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
|
STOP_LED_EFFECTS
|
||||||
|
SET_LED_EFFECT EFFECT=sb_logo_meshing
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_calibrating_z]
|
[gcode_macro status_calibrating_z]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
|
STOP_LED_EFFECTS
|
||||||
|
SET_LED_EFFECT EFFECT=sb_logo_calibrating_z
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
|
|
||||||
[gcode_macro status_printing]
|
[gcode_macro status_printing]
|
||||||
gcode:
|
gcode:
|
||||||
_set_sb_leds_by_name leds="logo" color="printing" transmit=0
|
STOP_LED_EFFECTS
|
||||||
|
SET_LED_EFFECT EFFECT=sb_logo_printing
|
||||||
set_nozzle_leds_on
|
set_nozzle_leds_on
|
||||||
Loading…
Reference in a new issue