From 6668c239bf3f8ee8ca41ef076e9669e6e6e17530 Mon Sep 17 00:00:00 2001
From: miguel <miguelloy97@gmail.com>
Date: Fri, 22 Aug 2025 01:48:12 +0100
Subject: [PATCH] printer.cfg modified - 22/08/25 - 01:48:05

---
 printer_data/config/printer.cfg | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/printer_data/config/printer.cfg b/printer_data/config/printer.cfg
index e004566..b166ceb 100644
--- a/printer_data/config/printer.cfg
+++ b/printer_data/config/printer.cfg
@@ -268,10 +268,10 @@ pressure_advance_smooth_time: 0.040
 ##  Make sure to update below for your relevant driver (2208 or 2209)
 [tmc2209 extruder]
 uart_pin: nhk:gpio0
-tx_pin: nhk:gpio1
+#tx_pin: nhk:gpio1
 interpolate: false
 run_current: 0.5
-sense_resistor: 0.100 #previously 0.110
+sense_resistor: 0.110 #previously 0.110
 stealthchop_threshold: 0
 
 
@@ -590,11 +590,14 @@ spi_software_sclk_pin: EXP2_2
 
 #--------------------------------------------------------------------
 
-[mcu rpi]
-serial: /tmp/klipper_host_mcu
-
+#####################################################################
+#   Accelerometer
+#####################################################################
 [adxl345]
-cs_pin: rpi:None
+cs_pin: nhk:gpio27
+spi_software_sclk_pin: nhk:gpio18
+spi_software_mosi_pin: nhk:gpio20
+spi_software_miso_pin: nhk:gpio19
 
 [resonance_tester]
 accel_chip: adxl345