From a28a8b9a38ae1c18ea9111ac68b82371ed554023 Mon Sep 17 00:00:00 2001 From: miguel Date: Thu, 21 Aug 2025 04:23:14 +0100 Subject: [PATCH] printer.cfg modified - 21/08/25 - 04:23:07 --- printer_data/config/printer.cfg | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/printer_data/config/printer.cfg b/printer_data/config/printer.cfg index 1ffdf15..1472343 100644 --- a/printer_data/config/printer.cfg +++ b/printer_data/config/printer.cfg @@ -237,10 +237,10 @@ microsteps: 32 full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree nozzle_diameter: 0.400 filament_diameter: 1.75 -# heater_pin: PA2 #-----------------------------------------------------------------------------------------------------------------------------------------Heater Issue +heater_pin: PA2 #-----------------------------------------------------------------------------------------------------------------------------------------Heater Issue ## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types. ## Use "Generic 3950" for NTC 100k 3950 thermistors -# sensor_type: ATC Semitec 104NT-4-R025H42G #-----------------------------------------------------------------------------------------------------------------------------------------Thermistor Issue +sensor_type: ATC Semitec 104NT-4-R025H42G #-----------------------------------------------------------------------------------------------------------------------------------------Thermistor Issue sensor_pin: PF4 min_temp: 10 max_temp: 280