diff --git a/printer_data/config/printer.cfg b/printer_data/config/printer.cfg
index 1472343..29c4fb5 100644
--- a/printer_data/config/printer.cfg
+++ b/printer_data/config/printer.cfg
@@ -237,11 +237,11 @@ microsteps: 32
 full_steps_per_rotation: 200    #200 for 1.8 degree, 400 for 0.9 degree
 nozzle_diameter: 0.400
 filament_diameter: 1.75
-heater_pin: PA2 #-----------------------------------------------------------------------------------------------------------------------------------------Heater Issue
+heater_pin: nhk:gpio9 #-----------------------------------------------------------------------------------------------------------------------------------------Heater Issue
 ## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
 ## Use "Generic 3950" for NTC 100k 3950 thermistors
 sensor_type: ATC Semitec 104NT-4-R025H42G #-----------------------------------------------------------------------------------------------------------------------------------------Thermistor Issue
-sensor_pin: PF4
+sensor_pin: nhk:gpio29
 min_temp: 10
 max_temp: 280
 max_power: 1.0