mirror of
https://github.com/mloy97/RedboneBackup.git
synced 2026-01-01 11:55:57 -05:00
342 lines
No EOL
9.6 KiB
INI
342 lines
No EOL
9.6 KiB
INI
# Macros for setting the status leds on the Voron StealthBurner toolhead (or for any neopixel-type leds).
|
|
#
|
|
# You will need to configure a neopixel (or other addressable led, such as dotstar). See
|
|
# https://www.klipper3d.org/Config_Reference.html#neopixel for configuration details.
|
|
|
|
|
|
#####################################
|
|
# INSTRUCTIONS #
|
|
#####################################
|
|
# How to use all this stuff:
|
|
#
|
|
# 1. Copy this .cfg file into your Klipper config directory and then add [include stealthburner_leds.cfg]
|
|
# to the top of your printer.cfg in order for register the LEDs and macros with Klipper.
|
|
# 2. Define your LEDs by editing [neopixel sb_leds] below and entering the data pin from your control board
|
|
# as well as the color order.
|
|
#
|
|
# Note: RGB and RGBW are different and must be defined explicitly. RGB and RGBW are also not able to
|
|
# be mix-and-matched in the same chain. A separate data line would be needed for proper functioning.
|
|
#
|
|
# RGBW LEDs will have a visible yellow-ish phosphor section to the chip. If your LEDs do not have
|
|
# this yellow portion, you have RGB LEDs.
|
|
#
|
|
# 3. Save your config and restart Klipper.
|
|
#
|
|
# Note: We set RED and BLUE to 1.0 to make it easier for users and supporters to detect
|
|
# misconfigurations or miswiring. The default color format is for Neopixels with a dedicated
|
|
# white LED. On startup, all three SB LEDs should light up.
|
|
#
|
|
# If you get random colors across your LEDs, change the color_order to GRB and restart. Then
|
|
# omit the W for each suggested color_order in the next paragraph.
|
|
#
|
|
# If you get MAGENTA, your color order is correct. If you get CYAN, you need to use RGBW. If
|
|
# you get YELLOW, you need to use BRGW (note that BRG is only supported in the latest Klipper
|
|
# version).
|
|
#
|
|
# 4. Once you have confirmed that the LEDs are set up correctly, you must now decide where you want
|
|
# these macros called up...which means adding them to your existing gcode macros. NOTHING will happen
|
|
# unless you add the STATUS_????? macros to your existing gcode macros.
|
|
#
|
|
# Example: add STATUS_LEVELING to the beginning of your QGL gcode macro, and then add STATUS_READY
|
|
# to the end of it to set the logo LED and nozzle LEDs back to the `ready` state.
|
|
#
|
|
# Example: add STATUS_CLEANING to the beginning of your nozzle-cleaning macro, and then STATUS_READY
|
|
# to the end of it to return the LEDs back to `ready` state.
|
|
#
|
|
# 5. Feel free to change colors of each macro, create new ones if you have a need to. The macros provided below
|
|
# are just an example of what is possible. If you want to try some more complex animations, you will most
|
|
# likely have to use WLED with Moonraker and a small micro-controller (please see the LED thread for help inside
|
|
# of the stealthburner_beta channel on Discord).
|
|
#
|
|
#####################################
|
|
# END INSTRUCTRUCTIONS #
|
|
#####################################
|
|
|
|
[neopixel sb_leds]
|
|
pin: nhk:gpio7
|
|
# The pin connected to the neopixel. This parameter must be provided.
|
|
chain_count: 10
|
|
# The number of Neopixel chips that are "daisy chained" to the
|
|
# provided pin. The default is 1 (which indicates only a single
|
|
# Neopixel is connected to the pin).
|
|
color_order: GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRB, GRBW, GRBW
|
|
# Set the pixel order required by the LED hardware. Options are GRB,
|
|
# RGB, GRBW, or RGBW. The default is GRB.
|
|
initial_RED: 1.0
|
|
initial_GREEN: 0.0
|
|
initial_BLUE: 1.0
|
|
initial_WHITE: 0.0
|
|
# Sets the initial LED color of the Neopixel. Each value should be
|
|
# between 0.0 and 1.0. The WHITE option is only available on RGBW
|
|
# LEDs. The default for each color is 0.#
|
|
|
|
|
|
##########################
|
|
# LED Effects Animations #
|
|
##########################
|
|
|
|
##################
|
|
## logo effects ##
|
|
##################
|
|
|
|
[led_effect sb_logo_busy]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (1-8)
|
|
layers:
|
|
breathing 3 1 top (1,0,0)
|
|
|
|
[led_effect sb_logo_cleaning]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (1-8)
|
|
layers:
|
|
breathing 3 1 top (0.0, 0.02, 0.5)
|
|
|
|
[led_effect sb_logo_calibrating_z]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (1-8)
|
|
layers:
|
|
breathing 3 1 top (0.0, 0.0, 0.35)
|
|
|
|
[led_effect sb_logo_heating]
|
|
leds:
|
|
neopixel:sb_leds (1,3,7,8,6,2)
|
|
autostart: false
|
|
frame_rate: 24
|
|
layers:
|
|
comet 0.3 0 add (1, 0.18, 0)
|
|
|
|
[led_effect sb_logo_cooling]
|
|
leds:
|
|
neopixel:sb_leds (1,3,7,8,6,2)
|
|
autostart: false
|
|
frame_rate: 24
|
|
layers:
|
|
comet 0.3 0 add (0, 0, 1)
|
|
|
|
[led_effect sb_logo_homing]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (1-8)
|
|
layers:
|
|
breathing 3 1 top (0.0, 0.6, 0.2)
|
|
|
|
[led_effect sb_logo_leveling]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (1-8)
|
|
layers:
|
|
breathing 3 1 top (0.5, 0.1, 0.4)
|
|
|
|
[led_effect sb_logo_meshing]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (1-8)
|
|
layers:
|
|
breathing 3 1 top (0.2, 1.0, 0.0)
|
|
|
|
[led_effect sb_logo_printing]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (1-8)
|
|
layers:
|
|
gradient 0.3 1 add (0.3, 0.0, 0.0),(0.3, 0.3, 0.0),(0.3, 0.1, 0.0)
|
|
|
|
[led_effect sb_logo_standby]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (1-8)
|
|
layers:
|
|
breathing 3 1 top (0.01, 0.01, 0.01)
|
|
|
|
[led_effect sb_logo_part_ready]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (1-8)
|
|
layers:
|
|
breathing 3 1 top (0.0, 1.0, 0.0)
|
|
|
|
####################
|
|
## nozzle effects ##
|
|
####################
|
|
|
|
[led_effect sb_nozzle_heating]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (9,10)
|
|
layers:
|
|
breathing 3 1 top (1.0, 0.18, 0.0, 0.0)
|
|
|
|
[led_effect sb_nozzle_cooling]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (9,10)
|
|
layers:
|
|
breathing 3 1 top (0.0, 0.0, 1.0, 0.1)
|
|
|
|
[led_effect sb_nozzle_standby]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (9,10)
|
|
layers:
|
|
breathing 3 1 top (0.6, 0.0, 0.0, 0.0)
|
|
|
|
[led_effect sb_nozzle_part_ready]
|
|
autostart: false
|
|
frame_rate: 24
|
|
leds:
|
|
neopixel:sb_leds (9,10)
|
|
layers:
|
|
breathing 3 1 top (0.6, 1.0, 0.0, 0.1)
|
|
|
|
|
|
#####################
|
|
## all led effects ##
|
|
#####################
|
|
|
|
[led_effect sb_critical_error]
|
|
leds:
|
|
neopixel:sb_leds
|
|
layers:
|
|
strobe 1 1.5 add (1.0, 1.0, 1.0)
|
|
breathing 2 0 difference (0.95, 0.0, 0.0)
|
|
static 1 0 top (1.0, 0.0, 0.0)
|
|
autostart: false
|
|
frame_rate: 24
|
|
run_on_error: true
|
|
|
|
|
|
[led_effect rainbow]
|
|
leds:
|
|
neopixel:sb_leds
|
|
autostart: true
|
|
frame_rate: 24
|
|
layers:
|
|
gradient 0.3 1 add (0.3, 0.0, 0.0),(0.0, 0.3, 0.0),(0.0, 0.0, 0.3)
|
|
|
|
|
|
#######################
|
|
# LED Effects Statics #
|
|
#######################
|
|
|
|
[led_effect set_nozzle_leds]
|
|
leds:
|
|
neopixel:sb_leds (9,10)
|
|
#neopixel:caselight
|
|
autostart: false
|
|
frame_rate: 24
|
|
layers:
|
|
static 0 0 top (0.0, 0.0, 0.0, 1.0)
|
|
|
|
[led_effect set_logo_leds]
|
|
leds:
|
|
neopixel:sb_leds (1,2,3,4,5,6,7,8)
|
|
#neopixel:caselight
|
|
autostart: false
|
|
frame_rate: 24
|
|
layers:
|
|
static 0 0 top (1.0, 1.0, 1.0)
|
|
|
|
##############
|
|
# The Macros #
|
|
##############
|
|
|
|
[gcode_macro set_logo_leds_off]
|
|
gcode:
|
|
SET_LED_EFFECT EFFECT=set_logo_leds STOP=1
|
|
|
|
[gcode_macro set_logo_leds_on]
|
|
gcode:
|
|
SET_LED_EFFECT EFFECT=set_logo_leds
|
|
|
|
[gcode_macro set_nozzle_leds_on]
|
|
gcode:
|
|
SET_LED_EFFECT EFFECT=set_nozzle_leds
|
|
|
|
[gcode_macro set_nozzle_leds_off]
|
|
gcode:
|
|
SET_LED_EFFECT EFFECT=set_nozzle_leds STOP=1
|
|
|
|
[gcode_macro status_off]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
|
|
[gcode_macro status_ready]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=rainbow
|
|
|
|
[gcode_macro status_part_ready]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_nozzle_part_ready
|
|
SET_LED_EFFECT EFFECT=sb_logo_part_ready
|
|
|
|
[gcode_macro status_busy]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_logo_busy
|
|
set_nozzle_leds_on
|
|
|
|
[gcode_macro status_heating]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_logo_heating
|
|
SET_LED_EFFECT EFFECT=sb_nozzle_heating
|
|
|
|
[gcode_macro status_cooling]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_logo_cooling
|
|
SET_LED_EFFECT EFFECT=sb_nozzle_cooling
|
|
|
|
|
|
[gcode_macro status_leveling]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_logo_leveling
|
|
set_nozzle_leds_on
|
|
|
|
[gcode_macro status_homing]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_logo_homing
|
|
set_nozzle_leds_on
|
|
|
|
[gcode_macro status_cleaning]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_logo_cleaning
|
|
set_nozzle_leds_on
|
|
|
|
[gcode_macro status_meshing]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_logo_meshing
|
|
set_nozzle_leds_on
|
|
|
|
[gcode_macro status_calibrating_z]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_logo_calibrating_z
|
|
set_nozzle_leds_on
|
|
|
|
[gcode_macro status_printing]
|
|
gcode:
|
|
STOP_LED_EFFECTS
|
|
SET_LED_EFFECT EFFECT=sb_logo_printing
|
|
set_nozzle_leds_on |