milo/RedboneBackup
1
0
Fork 0
mirror of https://github.com/mloy97/RedboneBackup.git synced 2026-01-01 11:45:57 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions

printer.cfg modified - 21/08/25 - 04:52:45

Browse source
This commit is contained in:
miguel 2025-08-21 04:52:51 +01:00
parent 85e728736e
commit 24a74a98af
1 changed files with 2 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
printer_data/config/printer.cfg
View file

@ -24,7 +24,6 @@
## Obtain definition by "ls -l /dev/serial/by-id/" then unplug to verify
##--------------------------------------------------------------------
serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_41004C000A51313133353932-if00
#/dev/serial/by-id/usb-Klipper_stm32f446xx_41004C000A51313133353932-if00
restart_method: command
##--------------------------------------------------------------------
@ -159,7 +158,7 @@ enable_pin: !PG5
# Rotation Distance for TR8x8 = 8, TR8x4 = 4, TR8x2 = 2
rotation_distance: 4
microsteps: 32
endstop_pin: probe:z_virtual_endstop
endstop_pin: nhk:gpio10
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
## (+) value = endstop above Z0, (-) value = endstop below
## Increasing position_endstop brings nozzle closer to the bed
@ -305,7 +304,7 @@ max_temp: 130
## For the PROBE port. Will not work with Diode. May need pull-up resistor from signal to 24V.
#pin: ~!PB7
## For the DIAG_7 port. NEEDS BAT85 DIODE! Change to !PG15 if probe is NO.
pin: PG15
pin: nhk:gpio10
## For Octopus Pro Probe port; NPN and PNP proximity switch types can be set by jumper
#pin: ~!PC5